Released by  

I make a smaller version of Tobi’s Foxbling in silver, here’s a process video I made about it for CRAFT.

I used rubber cement to affix the template to a piece of 18ga. silver sheet, and used a small saw to cut out the shape on top of a jewelry maker’s bench pin, which is that fork-shaped wooden surface you see in the video. Finish it up with files and a lot of sanding using a flex shaft and slotted mandrel. The same flex shaft can be fitted with any number of tools, like the tiny drill bit I used to drill the pendant’s jumpring hole. I got most of the tools and supplies for this project from Rio Grande, who also buys back my scrap metal.

I’d like to put these necklaces into production (and $upport Mozilla, natch), so if you’re interested in staying informed on the project, email me.

Posted on September 17, 2010



  1. tbx says:

    love it!

The expressions published in this site are all in the public domain. You may enjoy, use, modify, snipe about and republish all F.A.T. media and technologies as you see fit.